∅3*80 Mm Raw Material Tungsten Carbide Rods Cutting Tools For Milling Inserts
Zhuzhou mingri cemented carbide co.ltd was established in 2001, May in zhuzhou city ,Hunan province ,China . Near 20 years of experience of manufacture of tungsten carbide products such as tungsten carbide dies,strips,plates,cutter,inserts,HPGR button stud ,slitting round knives for corrugated paper cutting and so on .
Application
Tungsten carbide rods are mostly applied for end mill and drill with sub-micron grain grade YL10.2 ,for non-ferrous precision cutting and wood cutting with sub-micron grain grade YG6X,and for fibreglass reinforced plastics,titanium alloys,hardened steel with ultra-fine grain grade YG8X,ECT. It maintains features as stable mechanical properties, easy to welding, high wear-resisting, etc. All of our tungsten Carbide Products are made from the high-purity Original/Virgin Raw Materials and HIP/Sintered, be of very high quality and excellent performances.
| Grades |
D(g/cm3) |
HRA |
≥
N/mm2
|
| YL10.2 |
14.45 |
91.8 |
3000 |
| YU06 |
14.7 |
2050 |
3000 |
| YU08 |
14.56 |
1900 |
4000 |
| YU12 |
14.05 |
1750 |
4000
|
Production
1, After confirm order, carbide thread boring rods products will start to prepare the RTP powder as per customer’s requirement with our wet-grinding machine
2, Before mass production, we need to do a trial pressing and sintering using every mould, and we check the appearances and the sizes of carbide thread boring rods samples with micrometer, projectors etc. to ensure that the requirements of the drawings can be met before batch production
3, Bulk production ,press the raw materials to shape blanks,and carbide thread boring rods blanks must be passed by semi finished inspection,
4, Then sinter blanks to finish (HIP) and finished products inspection, we have 10 sets of vacuum sintering furnace and 2 sets of HIP in the factory ensure the best quality and production capacity.
5, 1). cleaning/tumbling is to make the carbide thread boring rods look more beautiful.
2).The carbide thread boring rods can be ground according to customers’ order tolerance requirement
6. All products will be packed well to avoid any loss when shipping .All cartons will be required to put plastic film covered outside the carton box.
Packing
step 1, wrapped carbide thread boring rods in paper to avoid carbide thread boring rods to broke
step 2, put the carbide thread boring rods in inner small carton box
step 3, put the inner box into outter carton and fill the carton with foamed plastic
step 4, wrap the carton with packaging tape
step 5, you can choose any delivery way such as DHL,TNT,UPS ect.
Service
24 hour fast reply and contact our email : mr009@mrcarbide.com
whatsapp/wechat : 008618593402651
Welcome any inquiry about tungsten carbide products ,We can offer you factory price directly and good quality control guarantee.
