100% Raw Impact Resistant Carbide Wire Drawing Dies For Drawing Steel / Wires And Bars
Specification of carbide wire drawing die
1. Size: We have hundreds of moudles available now.Different sizes offered.
2. High wear&corrosion&abrasive resistance.
3. Advanced producing equipment.
4. ISO9001:2008,ISO9001:14001 certificated.
5. YM3A,YM3X,YM6X,YM8X,YM8,YM15 grades available.
6. Types: dies for drawing metal wires, steel, nonferrous metal and alloy wires
| Grade | Density | Hardness HRA | T.R.S MPa | Performance&application recommended |
| YM3A | 15.1 | 94.0 | 1700 | Excellent wear resistance,suitable for drawing steel,nonferrous metal and alloy wires less than ￠2mm under low stress,especially having better effect for drawing fine wires less than ￠0.6mm |
| YM3X | 15.2 | 92.0 | 1800 | Good wear resistance,suitable for drawing steel wires,nonferrous metal wires and alloy wires or bars less than ￠6mm under low stress |
| YM6X | 14.85 | 91.5 | 2300 | Good wear resistance,suitable for drawing steel,nonferrous metal and alloy wires and bars less than ￠20mm under high stress,also for drawing tubes less than ￠10 mm |
| YM8X | 14.9 | 90.5 | 2400 | Good wear resistance and strength,suitable for drawing all kinds of wires and bars |
| Other grades may be offered by customers'requirements |
Application of carbide wire drawing die
The tungsten carbide wire drawing dies are used for drawing steel,nonferrous metal and alloy wires and bars.
1,Tungsten carbide wire drawing die area is one of the main applications of tungsten carbide material. wire drawing dies usually can be divided into drawing steel and drawing wire and bar , used in less than ￠2mm steel wires and ￠20mm,50mm steel
2,Tungsten carbide wire drawing suitable for drawing steel bars and tubes under very high stress.
3.Good wear resistance and strength ,suitable for drawing all kinds of wires and bars
Why customers choosing us?
Zhuzhou Mingri Tungsten Carbide Co., Ltd. was established in May of 2001 with the investment of RMB 40 million. We have up-to-date production machine line and a lot of technicians.
Zhuzhou MingRi Cemented carbide co.,ltd is located in the tungsten carbide hometown , convenient transportation, from changsha airport just 40 minutes, Wuhan just 1.5 hour, from guangzhou just 2 hours. A favorable peripheral environment for cemented carbide manufacturing provides a natural barrier. Convenient traffic for tomorrow's internationalization laid a wide road.
We specialize in various of tungsten carbide products. Our products are sold to the UK, Europe, Japan, Korea, Taiwan area and Southeast Asia.
